What is Simatic Key Installer 2013 13 and Why You Need It for Your SIMATIC Software Projects
Simatic Key Installer 2013 13: What is it and how to use it?
If you are working with SIMATIC software products, such as STEP 7, WinCC, SINAMICS Startdrive, and more, you might have heard of simatic key installer. It is a tool that helps you to install and manage licenses for these software products, without requiring any special diagnostic software or hardware. In this article, we will explain what simatic key installer is, what are its benefits, how to download and install it, how to activate SIMATIC software products with it, how to update and uninstall it, and answer some frequently asked questions about it.
simatic key installer 2013 13
Introduction
Simatic key installer is a tool that allows you to install and manage licenses for SIMATIC software products, such as STEP 7, WinCC, SINAMICS Startdrive, and more. It is a simple executable file that you can run on your computer, without requiring any special diagnostic software or hardware. It works by generating license keys for the selected software products, based on your computer's hardware ID. You can then use these license keys to activate your software products with the automation license manager.
There are many benefits of using simatic key installer for your SIMATIC software products. Some of them are:
You can easily activate multiple software products with one tool.
You can save time and money by avoiding purchasing separate licenses for each software product.
You can avoid license expiration or invalidation issues by generating new license keys whenever needed.
You can transfer licenses from one computer to another with ease.
You can backup and restore your licenses in case of system failure or data loss.
To use simatic key installer, you need to have a computer that meets the following requirements:
Operating system: Windows XP/Vista/7/8/10 (32-bit or 64-bit)
Processor: Pentium III or higher
Memory: 256 MB RAM or higher
Disk space: 50 MB free space or higher
Internet connection: Required for downloading the tool and checking for updates
Simatic key installer is compatible with most of the SIMATIC software products, such as:
STEP 7 V5.6 Professional 2017
STEP 7-BASIS V5.5
STEP 7 Lite V3.0
S7-PLCSIM V5.4
S7-GRAPH V5.3And many more. You can check the full list of supported software products on the official website of Siemens.
How to download and install simatic key installer
To download and install simatic key installer, you need to follow these steps:
Go to the download link of simatic key installer 2013 13, which is https://plcforum.uz.ua/viewtopic.php?f=3&t=20264. This is a forum where you can find the latest version of the tool and other useful information.
Download the file named Simatic_Key_Installer_2013_13.zip, which is about 7 MB in size. You can use any download manager or browser to download the file.
Verify the file integrity by checking the MD5 checksum of the file. The MD5 checksum is a unique code that identifies the file and ensures that it is not corrupted or tampered with. You can use any online tool or software to calculate the MD5 checksum of the file. The MD5 checksum of Simatic_Key_Installer_2013_13.zip is 0b9f0f6c8d9f4b4c0e8f9a9b6e7d6d0a. If the MD5 checksum of your downloaded file matches this code, then you have downloaded the correct file.
Extract the zip file to a folder on your computer. You can use any software that can handle zip files, such as WinRAR, 7-Zip, or Windows Explorer. You will see a folder named Simatic_Key_Installer_2013_13, which contains two files: Simatic_Key_Installer.exe and Readme.txt.
Run the file Simatic_Key_Installer.exe by double-clicking on it or right-clicking and selecting Run as administrator. You will see a window that shows the setup wizard of simatic key installer.
Follow the instructions on the setup wizard to install simatic key installer on your computer. You will need to accept the license agreement, choose the installation folder, and confirm the installation.
Wait for the installation to complete. You will see a message that says Installation completed successfully. Click Finish to exit the setup wizard.
Check the installation status by looking for a shortcut named Simatic Key Installer on your desktop or in your Start menu. You can also go to the installation folder and run the file Simatic_Key_Installer.exe again.
Troubleshoot any errors that might occur during the installation process. Some of the common errors are:
The file Simatic_Key_Installer.exe is missing or corrupted. This means that you have downloaded an incomplete or damaged file. You need to download the file again and verify its integrity with the MD5 checksum.
The file Simatic_Key_Installer.exe is blocked by your antivirus or firewall software. This means that your security software has detected a potential threat in the file and prevented it from running. You need to disable your security software temporarily or add an exception for the file in your settings.
The file Simatic_Key_Installer.exe is not compatible with your operating system or hardware. This means that you have an outdated or incompatible version of Windows or your computer does not meet the minimum requirements for simatic key installer. You need to update your operating system or upgrade your hardware.
How to activate SIMATIC software products with simatic key installer
To activate SIMATIC software products with simatic key installer, you need to follow these steps:
Launch simatic key installer by double-clicking on its shortcut or running its executable file from its installation folder.
Select the software products that you want to activate from the list on the left side of the window. You can select multiple products by holding down Ctrl or Shift keys while clicking on them.
Click on Generate Keys button on the right side of the window. You will see a window that shows the license keys for each selected software product, based on your computer's hardware ID.
Copy these license keys by clicking on Copy Keys button or using Ctrl+C keys on your keyboard.
Paste these license keys into a text file and save it on your computer. You can name it anything you want, such as Licenses.txt.
Open the automation license manager by clicking on Start button on your computer and typing alm in the search box. You can also find it in the Start menu under SIMATIC or in the installation folder of your SIMATIC software products.
Select the software products that you want to activate from the list on the left side of the window. You can select multiple products by holding down Ctrl or Shift keys while clicking on them.
Click on License keys button on the right side of the window. You will see a window that shows the license keys for each selected software product, if any.
Click on Import license key button on the bottom of the window. You will see a window that allows you to browse and select the text file that contains the license keys that you generated with simatic key installer.
Select the text file that you saved earlier, such as Licenses.txt, and click on Open button. You will see a window that shows the license keys that are imported from the text file.
Click on OK button to confirm the import. You will see a message that says License key(s) imported successfully. Click OK again to close the message.
Check the activation status of your software products by looking at the icons next to them on the list. A green icon means that the software product is activated, a yellow icon means that it is partially activated, and a red icon means that it is not activated.
Troubleshoot any errors that might occur during the activation process. Some of the common errors are:
The license key is invalid or expired. This means that you have entered a wrong or outdated license key for your software product. You need to generate a new license key with simatic key installer and import it again.
The license key is already in use or locked. This means that you have already activated your software product on another computer or device with the same license key. You need to transfer or deactivate your license from the other computer or device before activating it on your current computer.
The license key is not compatible with your software product or version. This means that you have a different or incompatible version of your software product than the one that is supported by your license key. You need to update or downgrade your software product to match your license key.
How to update and uninstall simatic key installer
To update and uninstall simatic key installer, you need to follow these steps:
Check for updates by launching simatic key installer and clicking on Check for updates button on the bottom of the window. You will see a window that shows if there is a new version of simatic key installer available for download.
If there is a new version, click on Download button to download it. You will see a window that shows the download progress and status.
When the download is complete, click on Install button to install the new version of simatic key installer. You will see a window that shows the installation progress and status.
When the installation is complete, click on Finish button to exit the window. You will see a message that says Installation completed successfully. Click OK to close the message.
Uninstall simatic key installer by going to Control Panel on your computer and selecting Programs and Features or Add or Remove Programs. You will see a list of programs installed on your computer.
Find and select Simatic Key Installer from the list and click on Uninstall button. You will see a window that shows the uninstallation wizard of simatic key installer.
Follow the instructions on the uninstallation wizard to uninstall simatic key installer from your computer. You will need to confirm the uninstallation and wait for it to complete.
Remove the licenses by launching automation license manager and selecting License keys from the right side of the window. You will see a window that shows the license keys for each software product, if any.
Select the license keys that you want to remove from your computer and click on Delete license key button on the bottom of the window. You will see a window that asks you to confirm the deletion.
Click on Yes button to confirm the deletion. You will see a message that says License key(s) deleted successfully. Click OK to close the message.
Backup and restore your licenses by launching automation license manager and selecting Backup/Restore from the right side of the window. You will see a window that allows you to backup or restore your licenses to or from a file.
To backup your licenses, click on Backup button and select a file name and location to save your backup file. You can name it anything you want, such as Backup.alf. Click on Save button to save your backup file.
To restore your licenses, click on Restore button and select a backup file that you want to restore from. You can browse and select the file that you saved earlier, such as Backup.alf. Click on Open button to open your backup file.
Click on OK button to confirm the restoration. You will see a message that says License key(s) restored successfully. Click OK to close the message.
Conclusion
Simatic key installer is a useful tool that helps you to install and manage licenses for SIMATIC software products, such as STEP 7, WinCC, SINAMICS Startdrive, and more. It is a simple executable file that you can run on your computer, without requiring any special diagnostic software or hardware. It works by generating license keys for the selected software products, based on your computer's hardware ID. You can then use these license keys to activate your software products with the automation license manager.
There are many benefits of using simatic key installer for your SIMATIC software products, such as saving time and money, avoiding license expiration or invalidation issues, transferring licenses from one computer to another, and backing up and restoring your licenses in case of system failure or data loss. Simatic key installer is compatible with most of the SIMATIC software products, such as STEP 7, WinCC, SINAMICS Startdrive, and more. You can check the full list of supported software products on the official website of Siemens.
To use simatic key installer, you need to download and install it from a reliable source, such as plcforum.uz.ua, where you can also find the latest version of the tool and other useful information. You need to verify the file integrity with the MD5 checksum before running it. You need to follow the instructions on the setup wizard to install it on your computer. You need to launch it and select the software products that you want to activate from the list. You need to generate and copy the license keys for each selected software product. You need to open the automation license manager and import the license keys into it. You need to check the activation status of your software products and troubleshoot any errors that might occur during the process.
To update simatic key installer, you need to check for updates by clicking on Check for updates button on the bottom of the window. You need to download and install the new version of simatic key installer if there is one available. To uninstall simatic key installer, you need to go to Control Panel on your computer and select Programs and Features or Add or Remove Programs. You need to find and select Simatic Key Installer from the list and click on Uninstall button. You need to follow the instructions on the uninstallation wizard to uninstall it from your computer. To remove the licenses, you need to open the automation license manager and delete the license keys from it. To backup and restore your licenses, you need to open the automation license manager and backup or restore your licenses to or from a file.
We hope that this article has helped you to understand what simatic key installer is and how to use it for your SIMATIC software products. If you have any questions or feedback about simatic key installer, please feel free to leave a comment below or contact Siemens for technical support or customer service.
FAQs
What are the supported SIMATIC software products by simatic key installer?
Simatic key installer supports most of the SIMATIC software products, such as:
STEP 7 V5.6 Professional 2017
STEP 7-BASIS V5.5
STEP 7 Lite V3.0
S7-PLCSIM V5.4
S7-GRAPH V5.3
S7-S CL V5.3
S7-HiGraph V5.3
WinCC V7.4
WinCC flexible 2008 SP3
SINAMICS Startdrive V15
TIA Portal V15
And many more. You can check the full list of supported software products on the official website of Siemens.
What are the differences between simatic key installer and simatic ekb installer?
Simatic key installer and simatic ekb installer are both tools that help you to install and manage licenses for SIMATIC software products. However, there are some differences between them, such as:
Simatic key installer is a single executable file that you can run on your computer, while simatic ekb installer is a folder that contains multiple files and subfolders that you need to extract and run.
Simatic key installer generates license keys based on your computer's hardware ID, while simatic ekb installer provides license keys for various software products and versions that you can choose from.
Simatic key installer requires an internet connection to download and check for updates, while simatic ekb installer does not require an internet connection to work.
Simatic key installer is compatible with most of the SIMATIC software products, while simatic ekb installer may not support some of the latest or older software products or versions.
How to transfer licenses from one computer to another with simatic key installer?
To transfer licenses from one computer to another with simatic key installer, you need to follow these steps:
On the source computer, open the automation license manager and select Backup/Restore from the right side of the window. Click on Backup button and select a file name and location to save your backup file. You can name it anything you want, such as Backup.alf. Click on Save button to save your backup file.
Copy the backup file to a removable device, such as a USB flash drive or an external hard drive. You can also use an online storage service, such as Dropbox or Google Drive, to upload and download your backup file.
On the target computer, download and install simatic key installer from a reliable source, such as plcforum.uz.ua. Verify the file integrity with the MD5 checksum before running it. Follow the instructions on the setup wizard to install it on your computer.
Open the automation license manager and select Backup/Restore from the right side of the window. Click on Restore button and select the backup file that you copied from the source computer. You can browse and select the file from your removable device or online storage service. Click on Open button to open your backup file.
Click on OK button to confirm the restoration. You will see a message that says License key(s) restored successfully. Click OK to close the message.
Check the activation status of your software products by looking at the icons next to them on the list. A green icon means that the software product is activated, a yellow icon means that it is partially activated, and a red icon means that it is not activated.
How to deal with license expiration or invalidation with simatic key installer?
To deal with license expiration or invalidation with simatic key installer, you need to follow these steps:
Launch simatic key installer by double-clicking on its shortcut or running its executable file from its installation folder.
Select the software products that have expired or invalidated licenses from the list on the left side of the window. You can select multiple products by holding down Ctrl or Shift keys while clicking on them.
Click on Generate Keys button on the right side of the window. You will see a window that shows new license keys for each selected software product, based on your computer's hardware ID.
Copy these license keys by clicking on Copy Keys button or using Ctrl+C keys on your keyboard.
Paste these license keys into a text file and save it on your computer. You can name it anything you want, such as Licenses.txt.
Open the automation license manager and select License keys from the right side of the window. You will see a window that shows the license keys for each software product, if any.
Select the license keys that you want to replace with the new ones and click on Delete license key button on the bottom of the window. Yo